top of page

I love the adhesives for eyelash extensions without pretense that work wonderfully with all volume techniques. The problem with fans is that they can tighten, either immediately or during wear. Boss shows its "firm" and stable character by leaving the fans perfectly open. This "magician" is extremely fast and has an immediate coupling of 0.3-0.5 seconds (depending on the conditions in the cabinet). Choose the leader of the Tabya Lashes family - BOSS if you want an extremely fast and unpretentious glue in various conditions.



  1. Quick coupling speed: 0.3-0.5 seconds
  2. Formula: Liquid Versatile, adaptable to various working conditions
  3. Small smell and vaporization
  4. No Stabilizers
  5. No Stings
  6. Durability 6-9 weeks
  7. Professional Level For All Volume Techniques
  8. Made in South Korea
  9. Validity 8 months (from opening 1 month)


What are the disadvantages of BOSS adhesive?!

Its only drawback is its extremely high speed. If your work speed is not up to it and you move more slowly, you risk reaching the wire with the semi-dry adhesive, so the coupling will be superficial and the resistance will be low. For this reason, I recommend this adhesive in manual, band and twin lash volume techniques, where we end up with more extensions on the natural thread. If you are working with the ONE BY ONE volume technique, I recommend that you move extremely quickly and make sure that they have an optimal amount of adhesive for thicknesses of 0.07 and 0.1. For extensions with a base thicker than 0.12 and 0.15, there will be no quantity problems.


Storage and use rules:

  1. Storage & transport 5-23 degrees. At high temperatures the adhesive loses it's properties.
  2. The adhesive should be kept in a cool place, away from light and heat.
  3. The adhesive can be stored sealed in the fridge for maximum 3 months in a cardboard box or magic pack with a silicia gel, to protect it from excessive humidity.
  4. Optimal working temperature in the cabinet should be 21-24 degrees.
  5. Optimal cabinet humidity during application should be 40-55.
  6. The adhesive loses it's properties in the presence of other vapors (oxidants, gel, wax, paint, etc).
  7. The speed of the adhesive is indicative, this will also depend on other factors: humidity, temperature, oxygen.
  8. Shake the adhesive strongly before first application 3-5 minutes (before each application 1-2 minutes) or with the special device glue shaker 5-10 seconds.
  9. The adhesive drop needs to be changed approximately every 30-60 minutes, depending on the condition.
  10. The adhesive drop is applied on a clean surface, recommended cold: crystal stone, jade, support(protected by special stickers) silicone, etc.
  11. You can use the accelerator to accelerate the speed.



  • PMMA
  • Carbon Black

Lash Adhesive Tabya Boss 0.3 - 0.5 Seconds

    bottom of page